samsung printer: tech mode

The easiest way to find the serial number - a program to get the firmware automatically.

Firmware can always be seen on the board - but not the fact that the label corresponds to reality.



Samsung SCX 3200

Push the button Stop - both flashes to let go - printed sheet configuration.
If the LED is lit imprint Supplies Report. Firmware version will not be there.
Enter the service mode
Up (+) - Up (+) - Stop - Down (-) - Down (-) - Stop - Stop ( press quick )

The display shows the UC, choose with the + and -

To print all reports select the AA, after selecting the operation press the Print button

Complete list of commands:

UC - Usage Report Print

SD - Print Shading Report

SI - Print Supplies Report

EL - Print Event Log Report

CA - Print Customer Assistance Report

AA - All Report

SA - Scanner Aging Start

FC - Factory Memory Clear

LC - Toner Low Level Control

To press the Print for start



Samsung SCX 4600, SCX 4623F

For firmware version should dial on the panel -

SCX 4600

Menu - Id Copy - Left - Right - Menu - Stop

SCX 4623F

Menu - # - 1 - 9 - 3 - #

Enter the service mode

Menu - # - 1 - 9 - 3 - 4 Select TECH MENU



Samsung SCX 4824FN, SCX 4828FN

For version firmware need choose on the panel -

Menu # 193 #

The display shows the current firmware version



4824FN, 4825FN, 4828FN, 4833FD, 4833FR

"MENU" - "# 1934" - "TECH MENU" - "REPORT CONFIGURATION"

- The sequence for printing sheets of the report



Samsung CLP-310, 315, 310N, 315W, 320, 320N, 325, 325W

A report by pressing and holding the Stop button

Otherwise

Call SmartPanel Clp 310, SmartPanel Clp 320

Select Printer Setup

Select the information, and print a configuration page



The CLX-3170, 3170FN, 3175, 3175FN, 3175FW

"MENU" - "ID_COPY" - "LEFT" _ "RIGHT" - "MENU" - "BACK" _ "TECH MENU" - "REPORT CONFIGURATION"

- The sequence for printing sheets of the report



CLX-3180, 3180FN, 3185, 3185FN, 3185N, 3185FW
"MENU" - "ID_COPY" - "LEFT" _ "RIGHT" - "MENU" - "BACK" - "TECH MENU" - "REPORT CONFIGURATION"

- The sequence for printing sheets of the report



Samsung ML 1660, ML 1665, ML 1860, ML 1865
If the report by pressing the stop does not print it - will only spare chip.



ML-3310ND, 3710ND
Successive pressing on the keyboard:
"MENU" - "BACK" - "LEFT" - "RIGHT" - "OK" - "CANCEL" - "TECH MENU" - "REPORT CONFIGURATION"
- The sequence for printing sheets of the report



Print report the ML-2160
Press and hold the printscreen - the indicator flashes three times - print the Configuration report
Press and hold the printscreen - the indicator flashes three times and stay lit - Print Supplies Information report


Print report to the SCX-3400 - 3400W
We collect
up-up-stop-down-down-stop-stop
same scx-3200
AA - print all reports



Print report to the SCX-3400F 3400fw 3400FH
MENU - # -1934
Entering the service mode
print all reports.

ML-1640, 1641, 1645, 1660, 1661, 1665, 1666, 1667, 1860, 1865, 1865W, 1867, 1910, 1911, 1915, 1916, 2240, 2241, 2245, 2520, 2525, 2580, 2580N, 3310D
Hold the button "STOP/PRINT SCREEN" for about 2 to 15 seconds depending on your printer model. For example for
ML-1670 --> 10.sec. to print configuration list (Serial Number)
--> 15.сек. to print suplier report (CRUM-number)

ML-3310ND, 3710ND
As next press on the keyboard:
"MENU" _ "BACK" _ "LEFT" _"RIGHT" _ "OK" _
"CANCEL" _ "TECH MENU" _"REPORT CONFIGURATION"
if you did everything correctly, then these actions should result in the device printing you the report sheet, where you can find the firmware version of your device.

SCX-3200, 3205, 3207, 3200W, 3205W
As next press on the keyboard:
" + " _ " + " _ "STOP" _ " - " _ " - " _ "STOP" _ "STOP".
If you have correctly pressed the buttons in this order, then the abreviation "UC" should appear on the display. After that, you need to press the minus, until the "AA" appears, then "START". If everything was done correctly, the MFD will print the System information sheet.

SCX-4600, 4623F, 4623FN, 4824FN,4825FN, 4828FN, 4833FD, 4833FR

As next press on the keyboard:
"MENU" _ "# 1934" _ "TECH MENU" _
"REPORT CONFIGURATION"
- if you did everything correctly, then these actions should result in the device printing you the report sheet, where you can find the firmware version of your device.

CLP-310, 315, 310N, 315W, 320,320N, 325, 325W

The printer configuration sheet can be printed from "Smart Panel", which is included in the set of drivers for your device.
More information about this program you can find on "Samsung.com".

CLP-620ND
The printer configuration sheet can be printed from "Smart Panel", which is included in the set of drivers for your device.

More information about this program you can find on "Samsung.com".


CLX-3170, 3170FN, 3175, 3175FN,3175FW

As next press on the keyboard:
"MENU" _ "ID_COPY" _"LEFT"_"RIGHT"_ "MENU"_
"BACK"_"TECH MENU" _"REPORT CONFIGURATION" -
if you did everything correctly, then these actions should result in the device printing you the report sheet, where you can find the firmware version of your device.


CLX-3180, 3180FN, 3185, 3185FN,3185N, 3185FW

As next press on the keyboard:
"MENU" _ "ID_COPY" _"LEFT"_"RIGHT"_ "MENU"_
"BACK"_"TECH MENU" _"REPORT CONFIGURATION" -
if you did everything correctly, then these actions should result in the device printing you the report sheet, where you can find the firmware version of your device.


default password for clx-3185